HP Color Laser Printer 28 lb 8 1/2 x 11 Inch Paper 2500 Sheets (20500-0)

 HP Color Laser Printer 28 lb 8 1/2 x 11 Inch Paper 2500 Sheets (20500-0)

HP Color Laser Printer 28 lb 8 1/2 x 11 Inch Paper 2500 Sheets (20500-0)



Click Here



Thursday, December 15, 2011

Hitting With Big Barrel Bats in Youth League

Hitting With Big Barrel Bats in Youth League


My eight year old was playing baseball this fall on a coached pitched team. It was the perfect situation for the fall with only one practice every Sunday afternoon from 2:00-3:30. It was a great experience, one in which he learned a lot. He also had a great time with the other kids on the team. We were also playing flag football during the fall, so we didn't have a lot of time for extended fall ball, plus he is only 8 so I wasn't interested in having him involved with a team that was going to play games every week in the fall. I'm not a big proponent of playing year round baseball, but I'll save that for another article.

The coaches decided they would try to play a couple of games and put into action what they had been teaching during the Sunday practices. We traveled about 45 minutes away on a nice Saturday during the mid fall to play a double header with another eight year old team. It was a good experience but I was shocked when I Watched the other team hit. Yes, they beat us in both games 20-8 and 17-9, but that wasn't what shocked me, it was the bats they were using - Big Barrel Bats.

Let me back up a little bit first. My eight year old is our youngest. My oldest is 26 (I was 40 when our youngest was born) and we have already went through Little League, Babe Ruth, Summer Ball, etc...with our oldest. Also, as a high school baseball coach I host youth camps every summer and thought I was in tune with what was happening in youth baseball. But the bats I saw the other eight year old team using that day caught me by complete surprise. Every player on the other team was using a big barrel (2-5/8 inch diaMeter) bat, even though they were only eight years old.

The big barrel bat is designed for senior league play, which is typically 13-15 year olds. I did a little investigation and found that all the manufacturers (Easton, DeMarini, Louisville, etc...) specifically advertised that these big barrel bats are not approved for younger youth league teams. This was reinforced more when I found out that most youth leagues (Cal Ripen, Little League, Pony, etc.,.) do not allow players to use the larger barrel bats. However, I did find it odd that the manufacturers are making -10 to -13 drop bats (the unit distinction between the length and the weight of the bat, such as 27 inches long and 17 ounces in weight). It's obvious that the sale of these ultra-light, big- barrel bats are targeted at youth league players.

Youth league (ages 6-12) aluminum bats are typically 2 ¼ inches in diaMeter at the sweet spot and usually have a -8 in drop. The idea is to work up as they get older and eventually get to the -3 drop bat that is required in high school.

The problem with using big barrel bats at such a young age is it doesn't reinforce hitting mechanics. When a young hitter swings and misses the sweet spot, this reinforces the fact they need to use their hands to hit instead of their arms. The sweet spot is located 4-7 inches from the barrel end of the bat, located between the bat's trademark and the end of the bat. With aluminum (or composite bats) when the player misses the sweet spot, the bat jars in their hands. With a wood bat (which I think all young players should spend time learning to hit with) if the sweet spot is missed, the ball won't travel very far, maybe a ground ball to second or short. Anyway, it reinforces the need to rotate the hips and use the hands to get the barrel of the bat on the ball. With much practice, a player can become good at making consistent contact on the sweet spot of the bat. Using the hands correctly will strengthen the hands as they get older and allow them to progress in their mechanics as a hitter. Many players struggle with hitting on high school freshman or JV teams because they drag the bat head with the -3 bats that are required by the National Federation Rules. They have been swinging the -8 and -5 bats with their arms and the -3 is even heavier for them to swing. They haven't developed good strong hands from hitting properly.

The problem with the big barrel bats is the extended hitting zones. The player can have a long swing (one that disconnects with the arms getting away from the body) hitting the ball on the area below the sweet spot near the trademark and still get a solid base hit into the outfield. This was what I witnessed that Saturday this fall during the eight year old coached-pitched game. Most of the hitters in the opposing team line up used more arms than hands to hit, but they still had solid shots into the outfield. In fact, the few times they did make solid contact, the ball was sent like a laser to the outfield fences. Several times our players got hit with the ball (one in the head on a line drive to center field) and the coach was also hit by a hot line drive back to the mound. It was a little scary and these young players were not ready to be swinging these bats.

During my research I also found hitting with big barrel bats was common practice for travel league teams during the summer and fall. Most travel tournaMent sponsors do not have regulations against using larger barrel bats for youth league ages. With the manufacture warnings clearly listed on these bats, this may be a serious spot for litigation. The travel tournaMent sponsors and teams that use these bats against the manufacture warnings are exposing themselves to potential lawsuits.

From a hitting stand point, players will never understand their hitting flaws. It's like the weekend golfer that uses a monster head driver, one that corrects the flight of the ball if the swing is not perfect. As long as you make contact anywhere on the face of the club, you're in good shape. (I got one in my golf bag) The same is true for the large barrel bats for youth leagues. See, hitting a baseball is difficult and one that comes with much failure. A good big league player that hits around .300 will fail 7 out of 10 times. With young hitters, the failure is what makes them better. Missing the sweet spot on the bat reinforces the idea to use your hands and get the barrel on the ball.

If you're serious about your young player being a better hitter make him use the 2 ¼ inch barrel in youth league. He can also work with a wood bat in practices and scrimmage games. (or summer league play). Use bamboo when they are young (ages 6-9), moving to maple by the time they are 11 or 12 years old. Both of these bats are extremely durable and hard to break. By the time they are 15-16 years old they can graduate to a nice Ash bat. Most big leaguers use either Ash or Maple. All of our high school players have a wood bat in their bag and train with it regularly.

Don't delay the developMent of your youth league hitter by allowing them to use a big barrel bat. Rotate your hips and use your hands to hit the SWEET SPOT.




Friday, November 25, 2011

How to Produce Print CD Labels Using a Laser Printer

How to Produce Print CD Labels Using a Laser Printer


Individuals and corporate entities have turned to digital media as a storage option due to the convenience it brings in retrieving files. However, when files are voluminous, several CDs and DVDs might be necessary and each needs to be marked for easy identification. Print CD labels are often preferred and usually sourced from the home office laser printer rather than directly writing or putting marks on the disks' surface.

To print CD labels is easy because there are free templates from the Internet. But if a customized CD label is preferred, the process is be a bit more tricky. Typically, blank CD paper is used; particularly the type compatible with the home office laser printer because heat is generated during printing and could cause the printer to jam or mar the printouts if the CD paper adhesive is not resistant to heat. Steps in the printing process are detailed below.

First in line is to evaluate what you need. CD labels for personal collection will be enTirely different from the one intended for business transactions.
Make the CD label design. As Mentioned earlier, inspiration may come from different templates available on the Internet. Otherwise, if a custom design could satisfy the need, a more demanding and lengthy process is necessary.
Once the design has been decided, print it on ordinary paper and make a few adjustMents if necessary to come up with the final design.
Before loading the blank CD paper for printing, configure the Computer software to define label borders or determine the number of labels that a whole page can accommodate.
Once the setting has been organized, push the home office laser printer print button.

Remember that blank CD paper for inkjet printers cannot be used on laser printers. Heat from a laser printer is an important factor to be considered in choosing the type of paper required. It is important to use only paper designed exclusively to print CD labels because the type of adhesive used might affect the integrity of the disc. Corrosive adhesive can eventually damage the sensitive protective coating of the disc, affecting archival quality and storage longevity. Moreover, never use odd shaped CD labels because it will affect the stability of the disc when it turns in the disc drive.

Finally, to print CD labels, the quality of paper is of utmost importance since any home office laser printer is capable of delivering satisfactory printouts conveniently.